Busduct

Iz/Ix/If-way

Description

LS Cable & System Vietnam I-series Busduct can be used for applications carrying up to AC 1000V and currents from 630A to 6300A. When connected using a joint kit the connected surface is very large thus minimizing contact resistance, and basically IP54 level can be realized. It can be produced in both exterior and interior IP65 configuration, and interior IP42 according to application requirements. The I-series is classified into three types according to insulation: Iz/Ix/If-way. As an option, a single-bolt structure is feasible whereby the connector conductor connects directly without a joint kit

Types

• Iz-way
– Polyester film insulator
• If-way
– Fire-retardant product
– Mica film insulator
• Ix-way
– Epoxy powder insulator
– Class F and Fire-retardant properties available as an option

Benefits

The aluminum enclosure boasts high thermo-diffusional efficiency. It is lightweight, therefore easy to install, and does not require much space. Load divergence is feasible through the plug-in box installed on the Bus duct enabling simplification of the power system. Safety has been enhanced through earthquake and explosion proof features, and management is convenient due to the application of temperature and power monitoring systems.

Applications

• Electrical room
• Apartments and large buildings (high buildings, office buildings, knowledge industry centers, etc.)
• Plants (semi-conductors, displays, petrochemical plants)

Product Catalogues

Product Catalogues

Download

IZ/IX/IF-WAY

SANDWICH BUSDUCT

Download

CR WAY

CAST RESIN TYPE IP68

Download

NSPB

NON SEGREGATE PAHSE BUSBAR

Download

LT WAY

LIGHTING WAY BUSDUCT

Download

BTMS

TEMPERATURE MONITORING SYSTEM

Download